Proxima PL-300E Guide d'installation télécharger pdf (Page 38)

30 ProjectionLink User & Installation Guide

To remotely power the projector:

1. Plug in the power cord and turn on the projector’s main

power switch.

2. Press the power button in the upper right corner of the

transmitter to power the projector.

Powering the projector from the transmitter

The LED blinks orange while the projector’s lamp warms

up. When this LED changes to solid green, the projector is

ready to present.

All Proxima projectors use a warm-up/cool-down period to

ensure the life of the lamp. The transmitter’s LED changes

from green to orange when the power switch on the transmit-

ter is turned off. It continues to blink orange as the projector

completes its warm-up/cool-down procedure.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 63 64

PROJECTIONLINK 1
PL-300, PL-300E, AND BNDL-001 1
Warranty 2
Table of Contents 5
Chapter 1: 9
What is ProjectionLink? 9
The Projection Link System 10
ProjectionLink Operational 11
Understanding the 12
ProjectionLink System 12
What’s in the PL-300/PL 13
300E Accessories Box? 13
• four #10-32 screws 14
• eight 8 mm screws 14
What’s in the BNDL-001 15
Accessories Box? 15
RS-232 Control Cables 16
Chapter 2: 17
Installing ProjectionLink 17
Connecting the External 18
PL-300 Receiver 18
PORT CONNECTS… 19
To the DP6850 and DP6850+ 20
To the DP9240, DP9260, and 21
AV 9400+, and Pro AV 9410 22
To the Pro AV 9350 23
INPUT-2 INPUT-1INPUT-3 24
To the LX2 and LS2 25
To the DP9280 26
To the DP6150 27
RS232 Control Cable 28
Video Audio Cable 28
S-Video Cable 28
Video Cable 28
VGA Cable 28
Connecting to the Advanced 29
Connectivity Module 29
Configuring the Transmitter 30
Connecting the Transmitter 31
Connecting Input Sources 33
Connecting Local Outputs 34
Connecting CAT-5 Cable 35
Chapter 3: 37
Configuring ProjectionLink 37
Fine-Tuning the Image 40
Chapter 4: 43
Mounting ProjectionLink 43
Transmitter with table mount 44
Mounting the Transmitter in 45
Mounting the Receiver 46
Chapter 5: 47
Using ProjectionLink 47
Using ProjectionLink with an 49
IR Remote Control 49
Chapter 6: 51
Upgrading ProjectionLink 51
Firmware 51
Appendix A: 53
Troubleshooting 53
Troubleshooting Table 54
SYMPTOM SOLUTIONS 55
Technical Support 56
Appendix B: 57
Technical Specifications 57
SYSTEM SPECIFICATIONS 58
Appendix C: 59
Dip-Switch Settings 59
S520, DP6860 S520, DP6860 60
Appendix D: 61
Operational Summary 61

Commentaires sur ces manuels

Pas de commentaire

Proxima PL-300E Guide d'installation Page 38

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Proxima PL-300E