Proxima DP5100 Guide de l'utilisateur télécharger pdf (Page 17)

User’s Guide • 2–9

Chapter 2 • Detailed Setup

Connecting a Microphone

When you need to address a large audience while projecting an

NTSC, PAL, or S-VHS video image with no accompanying

audio, plug an amplified or wireless microphone equipped with a

line level output (maximum level of 1 volt, peak-to-peak) into the

left AUDIO port that corresponds to the input port you are

projecting the video through.

To address a large audience while projecting a computer image,

connect the source to the projector’s left and right RGB

(COMPUTER) AUDIO ports that correspond to the input port

you are projecting the computer video through.

If your microphone’s amplifier has only one output, use a

standard RCA cable to connect it to the projector’s left AUDIO

IN or left RGB (COMPUTER) AUDIO IN port.

AUDIO System

The DP5100 contains an internal sound system consisting of an

amplifier and a high-fidelity speaker. A separate audio system

must be used for external speakers or a sound system.

The projector must be turned on before you turn on your

computer, so that the computer properly senses the projector’s

display during its boot-up sequence.

Powering Up

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 48 49

Pas de commentaire

Proxima DP5100 Guide de l'utilisateur Page 17